Grip Strut Safety Grating For Walkway, Planks, Floors, Platform & Stair Treads
Grip Strut Safety Grating is used to protect the workers from sliping and falling on the walking way platform, especially the hazardous wet and oily walking conditions where mud, ice, snow, oil,etc. Its serrated tiny teeth designing maximum reduces the injury cases, allowing drainage of fluids, mud, chips, and other accident-causing debris. And the crocodile type opening is enough to keep the tools and other heavy objects from falling. The lightweight plate advantage makes easily to handle and installation.
This grip strut safety grating usually includes grip strut planks, grip strut walkways, grip strut stair treads, and Pre-O grip strut according to the rooftop walkways, catwalks, stairs, and other surface applications. When considering to buy the grip strut safety grating, you must make it clear to buy galvanized steel, Aluminium or stainless steel material, wall thick of 16, 14, 12, or 10 ga., width of 4-3/4’’ (2 diamonds), 7’’ (3 diamonds), 9-1/2’’ (4 diamonds), 11-3/4’’ (5 diamonds), or 24’’ (10 diamonds) , channel heights of 1-1/2’’, 2’’, or 2-1/2’’, length of , and the load-supporting capacity.
Regular grip strut material meets anti-slip values set forth in Federal Specification RR-G-1602A.
| Product name | Size | Material | Plate Thick | Width | Channel Depth | Open Area |
|---|---|---|---|---|---|---|
| Grip Planks | 12″ x 120″; 12″ x 144″ | Galvanized Steel | 13 Gauge (.0934″ Thick) | 6-Hole (12″ Width) | 1-1/2″ | 35% |
| Grip Planks | 10″ x 120″; 10″ x 144″ | Galvanized Steel | 13 Gauge (.0934″ Thick) | 5-Hole (10″ Width) | 2″ | 35% |
| Grip Planks | 12″ x 144″ | Aluminum Alloy 5052-H32 | .1250″ Thick (8 Gauge) | 6-Hole (12″ Width) | 2″ | 35% |
| Grip Planks | 18″ x 120″; 18″ x 144″ | Galvanized Steel | 11 Gauge (.1233″ Thick) | 10-Hole (18″ Width) | 2″ | 38% |
| Grip Walkway | 30″ x 120″ | Galvanized Steel | 11 Gauge (.1233″ Thick) | 16-Hole (30″ Width) | 5″ | 36% |
| Ladder Rung Plank | 2-1/4″ x 48-3/4″ | Stainless Steel304 | 16 Gauge (.0625″ Thick) | 4-Row (2-1/4″ Width) | 1-1/2″ | 4% |
| Ladder Rung Plank | 2-1/4″ x 60″ | Aluminum, Alloy 5052-H32 | .1250″ Thick (8 Gauge) | 4-Row (2-1/4″ Width) | 1-1/2″ | 4% |
| Ladder Rung Plank | 2-1/4″ x 48-3/4″ | Aluminum, Alloy 5052-H32 | .1250″ Thick (8 Gauge) | 4-Row (2-1/4″ Width) | 1-1/2″ | 4% |
| Ladder Rung Plank | 1-5/8″ x 48-3/4″ | Stainless Steel304 | 14 Gauge (.0781″ Thick) | 3-Row (1-5/8″ Width) | 1-1/8″ | 3% |
| Ladder Rung Plank | 1-5/8″ x 60″ | Stainless Steel316 | 14 Gauge (.0781″ Thick) | 3-Row (1-5/8″ Width) | 1-1/8″ | 3% |
| Ladder Rung Plank | 1-5/8″ x 60″ | Galvanized Steel | 13 Gauge (.0934″ Thick) | 3-Row (1-5/8″ Width) | 1-1/8″ | 3% |
1. Grip Strut Safety Plank Grating
Grip Strut Safety Plank Grating provides a maximum safety and slip resistant option against mud, ice, snow, grease, oil or detergents on plank, walkways, catwalks, stairs, etc. The plank grating is usually made of lightweight Low carbon steel Q235, pre-galvanized steel plate, Stainless steel 304 or 316, go througn cutting the right size easily, punching the serrated diamond hole, and bending into depth as your required.
The grip strut plank grating includes regular and heavy duty types, which can be 10’ or 12’ lengths and 4.75’’ to 24‘’, diamonds of ,channel heights of , metal wall thick of 12 & 14 ga. Pre-Galvanized and Plain Steel, 10 & 12 ga. 5052-H32 Aluminum, 16 ga. Stainless Steel 304 and 316 ,Widths 4-3/4’’, 7’’, 9-1/2’’, 11-3/4’’, 18-3/4’’, 24’’ , Heights 1-1/2’’, 2’’, 2-1/2’’, 3’’ Lengths, or cut to size, with necessary accessories of splice plates, anchor plates, diamond washer bolt kits. Notice: The channel depth and metal thick are the key of high load capacity.
Grip Strut Safety Plank Grating Advantages
√ Reducing accident rates by providing a tiny serrated surface in all directions when walking
√ Meet American Federal Standard RR-G-1602D and OSHA requirements
√ Lightweight to assemble easily
√ High strength to provide enough load capacity and longer spans
√ Professional grating advices in different applications for you
√ Right angle channel bending to enlarge the higher strength and long life
√ Open Diamond design allowing clean surface out of fluids, mud, chips and debris.
√ No need to maintain
Grip Strut Safety Plank Grating Applications
Commercial and industrial Construction Site, Catwalks, Stair treads, Work platforms, Rooftop walkways , Transportation servicing areas, Railcar platform and running boards
2. Grip Strut Walkway Channels
Grip Strut Walkway Channels are one-piece gratings with toe boards bending outward used on the walking flooring or conveyor catwalks. This panels usually are heavy duty walkway grip strut, with 9,10, or 11 ga., 24’’ width 10 diamonds, and 10’ or 12’ length for long span walkways. Splice plate kits, hold-down clips, handrail brackets can also be provided. Importantly, this 10 diamonds walkway grip strut does support enough concentrated load compared with two assembly 5 diamonds panel, also safer and more economical.
3. Grip Strut Stair Treads
Grip Strut Stair Treads is a safe grating, made up of punched steel plate with serrated diamond holes and welded ending plate with round & slot holes to be bolted to the stairs, and especially the additional abrasive nosings required more safety.
12ga. And 14 ga. Stair treads are the standard steel plate wall thick, and 12 ga. Or 10 ga. For Aluminium material, 16 ga. for stainless steel 304 or 316
The width of grip strut stair treads can be 4-3/4″ (2 diamond), 7″ (3 diamond), 8-1/8″ (3 diamond with abrasive nosing), 9-1/2″ (4 diamond), 10-1/2″ (4 diamond with abrasive nosing) and 11-3/4″ (5 diamond). And channel height of 1- 1/2’’ or 2’’
Products will be offered with or without abrasive nosing.
4. Grip Strut Ladder Rungs
If narrowed stair treads, you can choose one diamond 2-1/2’’ width, 14 ga. Pre-galvanized steel thick, Height: 1-1/8’’ ladder rungs, which can be Lengths: 3’, 4’, 10’, 12’ or cut to size;
5. Perf-O Grip Safety Grating
Perf-O Grip Safety Grating is a slip protecting round debossed and perforated holes plate, to supply masimum safety, allowing fluids, mud, chips and other potential accident-causing debris to drain away.
√ 1-15⁄16″ or 2’’ on center hole spacing
√ 2 holes (5″ wide) or 6 holes (12″ wide) plank
√ 10-hole (18″ wide) or 16-hole (30″ wide) plank
√ Hot dipped galvanized surface finish
√ 38% of opening area rate to keep small tools from falling
